Switching Power Supply Type SPD 30W DIN rail mounting * * * * * * * * * Universal AC input full range Installation on DIN rail 7.5 or 15mm Short circuit protection Overload protection Class 2 output High efficiency LED indicator for DC power ON Power Ok output CE, TUV approved and cULus Listed Product Description Ordering Key The Switching power supplies SPD series are specially designed to be used in all automation application where the Model Mounting ( D = Din rail ) Output voltage Output power Input Type Optional features installation is on a DIN rail and compact dimensions and performance are a must. SP D 12 30 1 B Input type: 1= single phase Approvals a Description f t B Optional Features rt gepr ua u Rheinland Product Safety Class I, Div 2 Spring connectors d p e T y e appro v UL 1310 Code B UL 60950-1 Output performances MODEL NO. SPD05 SPD12 SPD24 SPD48 INPUT VOLTAGE 85~264 85~264 85~264 85~264 VAC VAC VAC VAC OUTPUT WATTAGE 30 30 30 30 OUTPUT VOLTAGE Single Output Models WATTS + 5 VDC WATTS +12 VDC WATTS +24 VDC WATTS +48 VDC OUTPUT CURRENT EFF. (min.) EFF. (typ.) 6000 mA 2500 mA 1250 mA 625 mA 77% 82% 83% 83% 79% 84% 86% 86% Output Data Line regulation Load regulation Minimum load Turn on time (full resistive load) Vi nom, Io nom Vi nom, Io nom with 3500F CAP Transient recovery time Ripple and noise Output voltage accuracy Temperature coefficient Hold up timeVi= 115VAC Vi= 230VAC Voltage fall time (I0nom) 1 0.5% 0.5% 0 1000ms 2000ms 2ms 50mVpp 1% 0.03%/C 20ms 30ms 150ms max Rated continuous loading 5V Model 12V Model 24V Model 48V Model Reverse voltage 5V Model 12V Model 24V Model 48V Model Capacitor load Voltage rise time Vi nom Io nom Vi nom, Io nom with 3500F CAP 6A @ 5VDC/5.4A @ 5.5VDC 2.5A @ 12VDC/2.1A @ 14VDC 1.25A @ 24VDC/1.05A @ 28VDC 0.625A @ 48VDC/0.54A @ 55VDC 7.5VDC 18VDC 35VDC 63VDC 3500F 150ms 500ms Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 18/04/12 Switching Power Supply Type SPD 30W DIN rail mounting Input Data Rated input voltage Voltage range AC DC Rated input current (Vi : 115VAC, Io nom) Typ. Max. Inrush current Vi= 115VAC Vi= 230VAC 100 - 240VAC 85 - 264VAC 90 - 375VDC 560mA 800mA 20A 40A Power dissipation (Vi : 230VAC, Io nom) 5V Model 12V Model 24V Model 48V Model Frequency range Leakage current Input-Output Input-FG 8.5W 5.6W 5.5W 4.9W 47- 63Hz 0.25mA 3.5mA Controls and Protections Overload Input fuse Output short circuit Power ready output (only SPD 24) On threshold Off threshold 1) 110 - 140% T2A/250VAC internal1) Fold forward 19.2-19.4VDC 19.1-19.3VDC Over voltage protection VDC Min. 5V Model 6 12V Model 15 24V Model 30 48V Model 60 Internal surge voltage protection Varistor Max. 6.8 16.5 33 66 (IEC 61000-4-5) Fuse not replaceable by user General Data (@ nominal line, full load, 25C ) Ambient temperature Derating (>61C to +71C) Ambient humidity Storage Protection degree Cooling Pollution degree -40C to 71C 2.5%/C 20 ~ 90%RH -40C to +85C IP20 Free air convection 2 MTBF (Bellcore issue 6 @ 40C, GB) 5V Model 12V Model 24V Model 48V Model 551000 Hours 582000 Hours 588000 Hours 609000 Hours Case material Plastic: PC, UL94-V0 Dimensions LxWxD mm(inch) 90(3.6) x 40.5(1.59) x 114(4.49) Weight 270g Norms and Standards Vibration resistance Shock resistance UL / cUL TUV CCC meet IEC 60068-2-6 (Mounting by rail: 10-500Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis) meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 faces, 3 times for each face) UL508 listed, UL60950-1, UL1310 Class 2 Power (only 5V, w/o Class 2) Recognized, ISA 12.12.01 (Class 1, Division 2, Groups A, B, C and D) EN 60950-1, CB scheme EN 61558-1, EN 61558-2-17 (meet EN 60204) GB4943, GB9254, GB17625.1 CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3, EN 61000-4-4 Level 4, EN 61000-4-5 L-Level 3, L/N-FG Level 4, EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11, ENV 50204 Level 2, EN 61204-3 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 18/04/12 2 Switching Power Supply Type SPD 30W DIN rail mounting Block Diagrams Rdy connection RL >700ohm Rdy L Fuse Vo+ Line Filter Inrush Current Limiter and Rectifier Switching Device Vo- N -Vout PWM Controller a) Relay Rdy Rectifier 2.2k 0.5W OptoIsolation Reference & Error Amp. OptoIsolation Over Voltage Detection 5.1k 0.3w Vout ADJ Output Level Detection -Vout b) 5V signal DC ON (Green LED) RDY (Open Collector) Pin Assignement and Front Controls Pin No. Designation Description 1 RDY DC OK output for relay (not connect except 24V model) 2 + Positive output terminal 3 + Positive output terminal 4 - Negative output terminal 5 - Negative output terminal Ground this terminal to minimize high-frequency emissions N Input terminals (neutral conductor, no polarity at DC input) L Input terminals (phase conductor, no polarity at DC input) Vout ADJ Trimmer-potentiometer for Vout adjustment DC ON Operation indicator LED Derating Diagram Typ. Efficiency Curve 95 90 85 80 Efficiency (%) Output voltage (%) 100 75 70 65 60 55 50 230 VAC 115 VAC 45 40 0 -25 61 Temperature (C) 3 75 71 10 25 50 75 100 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 18/04/12 Switching Power Supply Type SPD 30W DIN rail mounting Output Voltage (%) Typ. Current Limited Curve 100 75 230 VAC 115 VAC 50 25 0 120 130 140 150 160 170 180 190 Output Current (%) Mechanical Drawings mm (inches) Installation 40.50 (1.59) 40.50 (1.59) 543 2 1 543 2 1 - - + + Rdy - - + + Rdy Vout ADj DC ON 90.00 (3.60) 90.00 (3.60) Ventilation and cooling N L Vout ADj Connector size range Spring terminal Screw terminal DC ON N L 67 8 67 8 114.00 (4.49) Max. torque for terminal Input terminals Output terminals General tolerances mm(in.) 0.00 (0.00) / 30.00 (1.18) 30.00 (1.18) / 120.00 (4.72) Normal convection All sides 25mm free space for cooling is recommended AWG24-14 (0.2~2mm2) flexible/solid cable, 10mm stripping at cable and recommends use copper conductors only, 60/75C AWG26-12 (0.2~2.5mm2) flexible/solid cable, connector can withstand torque at max 0,56Nm (5 lbs-in). 4~5 mm stripping at cable and recommends use copper conductors only, 60/75C 0.56Nm (5.0lb-in) 0.56Nm (5.0lb-in) 0.30 (0.01) 0.50 (0.02) Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network. 18/04/12 4